All About 80's Music

80's Porn Music

Promotional Giveaway Apple Ipod® Video

The experience compares well to the iPod Classic, though you are best off with shows/movies that rely more on dialogue and less on stunning visuals as something is inevitably lost on the tiny screen. The sound is great though and having video on the nano makes it a more viable alternative to the disk-based players. This update does not work with 80 GB or 160 GB iPod Classic models. This advanced files retrieval tool support restoration of hard drive-based iPod Classic data. Undelete utility retrieves the touch screen iPod Touch.

It's now the iPod Classic , to identify it as the device that started the craze. The revamped model sports an entirely metal case and is even thinner than its predecessor. This new interface, found on both the Nano and the Classic (the latter is now the moniker for the full-size, video-capable iPod), is less of wholesale change than it is a facelift. The interface update consists of two primary components: The introduction of Cover Flow for visually navigating through your album collection; and the repurposing of the white space on the right-hand side of the screen to introduce visual content previews. The classic option for this is DVD Decrypter free, available through various Internet sites and AnyDVD ($49, http://www.slysoft.com ). For normal standard DVD to iPod conversion, AnyDVD doesn’t offer anything particularly remarkable, but it is worth mentioning that they also offer an HD-DVD and Blu-Ray option for the main AnyDVD software for an additional $30.

The iPod classic is available in silver and black, and has an anodized aluminum and polished stainless steel enclosure. Very sleek and classic packaging for this product. The second is a totally revised new user interface the Nano shares with the updated new iPod Classic. The third its its new physical form factor.

Although the storage capacity is not the same, perhaps upgrading to the new 120GB iPod Classic is a better option. According to your best price 120gb iPod Classic table, it is now available from 162 in the UK.

This new iPod Video and the iPod Photo just make all of the older generation iPods seem so ancient. You will be able to view your digital image library right on this iPod and best of all you can even have full movies or just little clips for portable fun. All services and information provided on this website are provided as general information only. Any medical advice, home remedies and all other medical information on this website should not be treated as a substitute for the medical advice of your own doctor. The tediousness of this process has been a stumbling block for video players in general; iTunes simply can't rip a DVD like it would an audio CD. Now if iTunes had a built-in video converter, it'd be another story.

Late last year, amid much hype -- and after Steve Jobs repeatedly belittled portable video devices -- Apple announced its fifth-generation iPod , dubbed by many as the iPod video. Seven months later, the U2 iPod has caught up to the pack. Like the nano, the slot next to the headphone socket has been removed so your previous generation headphone remotes won’t work. The headphone socket has been moved to the right and the hold switch in now on the left. I am keeping their name because with all the different events we have every year I am sure that it will not be the only time that I will need the services of a 5th Generation iPod repair company. There is comfort in knowing you can get something fixed when you need it.

We could see Apple Computer’s fifth-generation iPod (30GB/$299, 60GB/$399) from four angles - respectively from four person's perspective like an audiophile, a photographer, a movie lover and lastly a mainstream consumer. But no single one of those reviews would do full justice to the company’s latest handheld creation. But it is simply an iPod, the fifth generation. I tested a 30GB model ($299 as of 7/21/06; Apple also offers a 60GB version for $399.). Apple?s third-generation iPod shuffle no longer includes the familiar control pad of previous models, instead providing a slim, three-button remote controller on the headphone cable. As we reported last week, this means the new iPod shuffle is not currently functional with any headphones but Apple?s own .
Hard disk's moving part mechanism also generates more noise which could potentially affect user?s experience while enjoying the movie or music streaming. What explains the press corps' exuberance for Apple in general and the iPod in particular? After all, the portable video player isn't a new product category?Archos, RCA, Samsung, and iRiver got there months and months ago. Building a generation of fans is a sure part of their goals for Zune.
Yes it's gone through a handful of minor button re-arrangements and scroll wheel iterations but the general appearance has stayed the same. That said the 5th gen iPod Video is the sleekest version yet and is rumored to undergo yet another redesign later this year! Presumably after the release of that Apple phone thing, which has gotten hardly any press at all!in Antarctica. The fourth-generation iPod nano isn't the dramatic overhaul last year's nano was. If you've already got a 3G nano, the 4G model's new features may not be compelling enough to get you to upgrade--especially if you prefer the 3G model's more-pocket-friendly shape. Video is a major draw to consumers in general, as evidenced by sales of HDTVs, so Apple’s move into video is a logical progression. If videos on iTunes and iPods catch on, Apple could once again change the way people buy music, or even the concept of what makes an album.

Apple is back with its latest video iPod, generation 5.5. This one features an 80GB drive and a slick black exterior. In the fall of 2005, Apple took their first steps into the portable video market with the fifth-generation iPod with video capabilities. This original “video iPod” sported a 320x240 screen and supported playback of videos encoded only at that maximum resolution using very specific formats. I guess this is a lack of knowledge since these 5th generation Ipods are so new.
This format is akin to WMA and AAC but is generally known as a dark horse, as it is used by only Sony-branded players. Music downloaded or streamed from Sony's Connect music store are ATRAC3 files. The new iPod features seamless integration with iTunes 7 and the iTunes Store which now includes over 75 Hollywood movies, 220 television shows and popular video games designed specifically for the fifth generation iPod. The new iPod is available in a 30GB model at the new low price of $249 and an 80GB model, which holds up to 20,000 songs or 100 hours of video, for $349. The design of this video device of the new generation is therefore very important. The design of the new iPod video represents more than the tastes of the nowadays generations, but also the specific lifestyle always in move and almost always in a hurry.
Even the new 60GB model is 10 percent thinner than the fourth-generation 20GB iPod. More features in less space.

Recent iPods are designed around a central scroll wheel ? The full-sized model stores media on an internal hard drive, while the other models use flash memory, allowing for a physically smaller size. The thing in this picture just looks silly with the touch screen Click Wheel. They're scrolling with the wheel; they're looking at it; they're playing with the ear buds. They fetishize this object.
It’s a close cousin to the iPhone that connects to the Internet via Wi-Fi wireless networking and replaces the famous iPod click wheel with a touch screen. It starts at $299, $100 less than the iPhone but with the same eight-gigabyte capacity. Like its famous siblings, iPod photo features the touch-sensitive Apple Click Wheel that's the envy of the industry. You'll use it to navigate iPod photo's new menu. It remains exceptionally simple: Click on the marked spots for play, fast forward, rewind, and the menu, and scroll the wheel around to control volume and navigate through menus.

The iPod Shuffle has become a hit among runners and sports enthusiasts because it can clip onto any article of clothing and is small enough that you don't even notice it's there. The iPod Shuffle comes in several colors and stores 2 GB of music, which means that there is more enough storage space to provide you with fresh tunes on your next long-run. I didn't see the New York Times clearly clarify it in their article, which was my source. In this third "Exposed" article, Seth Fogie takes a peek under the hood of the iPod to investigate this engineering marvel. However, he doesn't stop there!
Anyway, the article or rumor (whichever you prefer) said that Nvidia, a company popular for its graphics software will provide the graphic interface of the gaming iPod. Nvidia is currently used in laptops, personal digital assistants, and Sony PSP . This article is about how to play iPod on TV without Apple TV. As you know, Apple TV is a connector which allows you to stream media files from your computer and view iPod video on TV.
Its interface is almost exactly like an iPod: a main screen containing categories (movie, music, photos, settings) that lead to lists of each item type, all listed as you would find them on an iPod. So, the first main benefit of the Apple TV is that it will be familiar to everyone who has used an iPod. It has the capacity to store 15,000 songs, 25,000 photos and 150 hours of video (for the 60 GB model that is priced at $ 299). The 4.1? x 2.4? x 0.55? colour LCD screen delivers H.264 quality video with a resolution of 320 X 240 pixels and upto 30 frames per second. Importing and saving photos was an important characteristic of the last models and it still is, even with the new features.

The iPod Video and iPod Photo both support TV out so you can watch videos or slideshows with audio and video outputted to your TV. Follow these steps to watch a video on a TV connected to an iPod. You can perform the same big-screen feat with iPod photo slideshows. Oh, and you can do it all from across the room using the optional Universal Dock and handy new Apple remote. Plus, the iPod natively supports the viewing of stored photos on a TV through video out — something the PSP can’t claim.

Secondly, Apple MacBook and MacBook Pro computers come bundled with iLife, a suite of applications ideal for learning the basics of photo editing, and audio and video editing. We’ll use those programs in several classes. This could include information about local water quality or the name and photograph of a local insurgent sympathizer. Marine Corps is funding an application for Apple devices that would allow soldiers to upload photographs of detained suspects, along with written reports, into a biometric database.
Stylish, ergonomic, delightful, aesthetically pleasing, jaw-dropping technology. And it plays your music in excellent quality and displays your pictures and videos on a big, bright, sharp screen. A drop in Apple shares on Friday is said to have been triggered by concerns that the California company would not meet iPhone and iPod shipment targets if flash memory production could not recover in time.

Apple offers iPods with storage for up to 80GB. Depending on the song length and resolution it can store up to 20,000 songs. Podcasting offers you the opportunity to self-publish radio shows on the internet. This chapter explains both the legal and technological requirements of podcasting, and how you can get started creating your own podcasts. It is also the format used by Archos , the only manufacturer to offer a digital video portable as of this writing.
The W880i delivers up to 18 hours music listening time, which is 4 hours more than iPod (30 GB) can offer. Of course we can?t be totally sure how true these numbers are. This makes for a wide variety of products and a very competitive marketplace, one in which manufacturers have to claw their way into the limelight with products offering something special. This alone will cause the Hollywood TV studios to beat a path to Apple's door to get their offerings on the new iTunes video store as fast as possible. Since Apple uses Fair Play DRM, they can use this new TV iTunes store to show the Movie Moguls their environment is safe since you cannot actually burn DVD's of the video content, but can download and view them on either a Mac or the iPod Video device to get a great video experience.

This section offers the lowdown on how to unfreeze iPod and iPhone models.
The changes done to the iPod were: a search feature, brighter screen, newly designed earphones, and a gap less playback. In addition to those features games were added and the battery life became longer when playing videos. However this now creates a playback problem while on the go because it means you have to scale on the fly your resolution down to your tiny screen. So do you encode your videos for your video iPods resolution or do you do it for your TVs intended resolution? The audio is great, and the video playback is great! There are always negatives, but the iPod Video is probably the closest to a perfect portable .
Video freezes, audio stops playing, screen turns red or green, short audio or video breaks during playback. This is common for some video converters.
However, each time YouTube updates their code, these plug-ins and scripts usually need to be updated. YouTube doesn't like these Firefox plug-ins and actively tries to disable them. The iPod can be restored to original Apple specs at any time by using the installer, or an Apple iPod Updater. There is the option to make Linux your iPod's default OS, but I don't recommend this.
All these new features don't come at the expense of portability, either. The iPod video is 45% smaller than the original iPod! The iPod Touch is feature filled, innovative and fun to use, and has a host of entertaining and useful apps available. It features a sharp and colourful display and is able to show me my favourite video clips, films and pictures. The storage capacity reaches up to 60GB.
Says Jupiter media (JUPM ) analyst Michael Gartenberg: "We'll continue to see an evolution in features, design, capacity, and price.". More features in less space? The iPod video reviews that can be encountered are usually positive as they usually stress on the nice features, functions and capabilities of the lated iPod version. Such reviews likewise mention about the numerous aspects and properties of the gadget that contribute to its success.
Super fast (up to 4x faster) DVD movie conversion in high video quality and audio quality plus many advanced features enable you to turn your iPod into a portable movie player and theater. Convert all your DVD collections to iPod and enjoy watching iPod movies, TVs, home videos on the go. The Ipod can play music files a little bit longer but I would still make the choice of a video player on a video features rather than on music ones. If you only care about music and not about the video maybe you should go for some MP3 player rather than Video and MP3 player. DLO's unit features a user interface similar to iTunes' Cover Flow.

By connecting the small, ultra-light “binocular” eyewear viewer to an iPod, users can watch their favorite music videos, video podcasts and TV shows with a large image right in front of their eyes. Because the display and audio systems are built into the eyewear, myvu can be worn in any position -- reclining on an airplane, sitting on a park bench and even lying down on a couch. You have an Apple iPod and would like to watch your favorite home video DVDs using it? But you do not know how to convert your files into iPod compatible format? However, with a little work, you can make watching streaming videos much easier.

I'm not much up on watches, but are some of the more expensive ones machined out of solid blocks of metal? So if you have one of those 5G iPods (also known as the * Video * iPod), you can't actually watch your rented movies on the device. Sure, the 5G has been .
My Seinfeldian statement has to do with the scores of programs available free or for sale at the App Store for iPhone and iPod Touch. It is the killer app . Many analysts believe that sales of Apple iPhone will cause sales of the iPod to slowdown, however, given the quite high price of the iPhone, it is unlikely to happen. A lower-end version, however, can affect both cell phone as well as media player markets. The buzz around the iPhone has been astronomical. The iPhone is part of the iPod line, for the most part.

The speculation is based on information in the beta release of the iPhone 3.0 firmware which shows support for a new chip enabling 802.11n.
Quicktime is a popular format for online streaming/download video for porn already. Having porn in a format for the iPod is not going to tarnish Apple's good name. I collect information here and there and at last get the problem solves. So below is the details shared here.
Solid state (SSD or flash) drives tend to be the more efficient of the two since they require no moving parts to access files. The higher the volume you set your Apple iPod Video 60GB MP3 player to, the more power it will require. But the new iPod will also support the MPEG-4 video standard, meaning users could view home movies and other unencrypted videos on it. A user could store up to 150 hours of video on the device, Apple said. You CAN now port your home movies to your iPod Video - giving you one more reason to upgrade to iLife 6 and arm yourself with an iPod Video. When Apple launched GarageBand , it opened avenues for budding musical talents to carry their demos for review; now iMovie 6 and the iPod Video provides a similar avenue for budding movie directors!
For example, the great advantage of connecting the i-Pod movies to the TV set and playing the videos on it is well received. But on the other hand, the fact that the i-Pod movies cannot be connected to the computer is seen as a disadvantage.
Why, he asked, would you send everyone to the iTunes store to download a music clip, unless you wanted to see the results? You should then use iTunes 7 to easily restore the software on your newly purchased Video iPod. Apple is also spearheading the digital music revolution with its iPod portable music players and iTunes online music store.
While more Intel-based products (new iBook or iMacs) or a phone are possible, neither strikes us as "fun" or "new.".Or it could be one more thing . Now comes the part where Apple thinks they were sooooo tricky. They switched a few wires. The inlcuded 12v adaptor rapidly charges your iPod, and then switches to a trickle charge to optimize its performance. Easy music made even easier.

Ever wonder what kind of chips make that device possible? At the heart of every iPod sits a chu . Your iPod, as designed by the maker, is supposed to be a one-way music transfer device, meant to put songs from your computer onto your iPod. You quickly find that sometimes, you need to put songs from your iPod back onto your computer.
This known virus affects only Windows computers, and up to date anti-virus software which is included with most Windows computers should detect and remove it. So far we have seen less than 25 reports concerning this problem. Launched by Apple Computer in October 2001, it was initially capable of storing 1,000 music tracks on its built-in hard disk drive; by 2004 a 40 gigabyte version was available capable of storing up to 10,000 tracks. The iPod was an instant success, and from 2004 it accounted for 90% of the hard-drive MP3 player market and 70% of the overall MP3 player market.

About the Author

Apple iPod .

Here are a few 80's Porn Music listings you might enjoy:

Know Your Age : Computer Software Turns Age-teller

The woes of misreading someone's age may soon be over, if you go according to a professor of electrical and computer engineering at University of Illinois, with the help of a software.

The professor, Thomas S. Huang says,"Age-estimation software is useful in applications where you don't need to specifically identify someone but would like to know their age."

After a wide and comprehensive research, the software engineers have come up with this trendsetting software.

Definitely, not only it will be a sort of fun for adventure seekers, the inherent age-forecasting ability of this software will help to maintain law and order too. Seems bizarre!

Amazingly enough, this software will help to keep the teenagers away from porn sites and other adult contents found online or on computers. The computer will simply read the various facial patterns of a particular user and based on the data collected, it will decide the authenticity of a user. If a teenager found, the computers will resist browsing porn.

Moreover, using the same process, it will also keep in check, the illegal purchasing of drinks and tobacco products by minors from vending machines. Also, this software will help to stop the unlawful entry of teenagers to a pub or a bar.

It is equipped with age-recognition algorithms. This algorithms will trace the age of someone facing the computer.

The software includes a database of 1,600 faces based on three modules ; face detection, discriminative manifold learning and multiple linear regression. This huge database comprised of the minute details of so many faces makes it efficient to predict someone's age with somewhat stunning accuracy.

The age-range it uses for the predictions is also quite wide as it tells the age of someone who is anywhere between one year to 93. The prediction accuracy of this software is good, near about 50 percent, when it is given an assignment to predict within a band of five years.

While it gives stunning results with 80 percent accuracy rate, when given an age-band within 10 years.

Though it may be unable to give 100 percent result as far as accuracy is concerned, it is still a great innovation in itself keeping in view how tough it is to predict someone's age. According to Eurekalerts, "Estimating someone's age is not an easy task, even for a computer. That's partly because the ageing process is determined not only by a person's genetic makeup, but by many other factors as well, including health, location and living conditions."

However, people related to moral-policing may ask why a commoner's age should be revealed against his/her will. For this Huang says, "All of this can be done without violating anyone's privacy. Our software does not identify specific individuals. It just estimates their ages."

Further, it may also help to prepare a survey report about the consumer concentration on a particular product at a particular store. For example, it may tell us which music CD was liked by teenagers out of many releases during a specified period or what are the gadgets they are running after.

About the Author

Pattrick is working as an industry analyst in the electronics and electrical industry for last fifteen years. He is working on a blog MyElectronicsBlog where you can get a lot of information on electronics industry, news, innovations, tradeshows, etc. . He is associated with one of the best electronics and electrical industry marketplaces Digitivity.com.

Below are a few more great 80's Porn Music deals on Amazon:

Oscars live-blog: Oscars made of Unobtainium for James Cameron as Hurt Locker cleans up
It's the biggest annual party in the world and you're not invited. But hey, there's nothing like virtual gatecrashing to get a taste of how the beautiful people live, right? Welcome to the Vancouver Sun's coverage of the Academy Awards. The red carpet has been rolled out; let's party.

Weird 80's Music

I'm 17 years old and I listen to 70's and 80's music..am I weird?!?

I love to listen to 70's and 80's music..I am basically obsessed with anything 80's movies and music.

My friends think I'm weird and tell me to "get with it" and start liking what's happening now. Which is probably Twilight and Disney sh1t.
Even my folks are a bit concerned? lol

Am I weird? =/

I'm 18 and I totally do the same thing.

I love 80s, Big Band, 1950s Rock n Roll, Motown. A bunch of old stuff.

Here are a few Weird 80's Music listings you might enjoy:

One of a handful of films which epitomizes the 1980s decade, Ferris Bueller's Day Off captured the imagination of high school kids all across America as they dreamt of mimicking the title character's ability to manipulate the authority figures in his life. Written and directed by John Hughes, the brains behind The Breakfast Club (1985) and numerous other 1980's cult classics, Ferris Bueller's Day Off launched Matthew Broderick's acting career into another dimension. In fact, Broderick garnered a Golden Globe nomination for his outstanding performance. It's a nomination more than worthy of mention, because it's the strength of the Ferris Bueller character that made this film such a smash hit.

Ferris Bueller's Day Off follows a day in the life of high school senior Ferris Bueller. Nearing graduation, he's intent on living his life to the fullest (although preferably outside the confines of school). So Ferris takes a planned day of vacation with his girlfriend Sloane (Mia Sara), and after a little coaxing, his best friend Cameron (Alan Ruck) joins them. Against Cameron's better judgment, the three drive his father's prized Ferrari into the windy city of Chicago for a day of fine dining, baseball, museums, and spontaneous fun. Meanwhile, Ferris may have successfully fooled his parents into believing he's deathly ill, but high school principal Ed Rooney (Jeffrey Jones) and Ferris's jealous sister Jeanie (Jennifer Grey) are not so easy. Intent on shattering his golden boy image, each one is hot on his trail, anxious to expose his web of deceit once and for all.

With a number of hilarious scenes, such as Cameron's feeble attempt to reverse the mileage on his father's Ferrari, the film earns its reputation as an elite classic of the 80's, on par with hits like Back To The Future (1985), The Breakfast Club (1985), and Weird Science (1985). The film does have its off-the-wall moments, such as when Ferris takes over a parade and starts singing while thousands of spectators engage in synchronized dancing. You wouldn't see such a sequence in a contemporary film, and like similar scenes from The Blues Brothers, it tends to date the film. But the strength of Ferris Bueller's Day Off is not its timeless humor, but the likeability of Ferris Bueller himself. Ferris is a cool guy. He doesn't put anyone down, but only looks for the best in people. More importantly, he manipulates his parents into thinking he's the perfect embodiment of innocence while he skips school and goes joyriding! Every child of the 80's wanted to be Ferris Bueller, and the wide appeal of his life philosophy is timeless, which is why the film continues to enjoy success with each new generation.

Further solidifying the movie's status as a landmark of its decade is the soundtrack, which is certainly one of the more diverse and interesting of its time. Where else can you find The Beatles, Wayne Newton, the theme to Star Wars, and the 80's classic 'Oh Yeah' by Yello all wrapped up into one movie which moves seamlessly from one scene to the next? Throw in a few future Hollywood stars in Kristy Swanson, Ben Stein, and Charlie Sheen (who stayed awake for over two days so he could achieve the desired drugged out expression for his character), and Ferris Bueller's Day Off transforms into the quintessential cult classic. Even after two decades, this film is just as entertaining as when it first premiered.

About the Author

Britt Gillette is author of The DVD Report, a movie review site [http://thedvdreport.blogspot.com] where you can find more reviews like this one of the Ferris Bueller's Day Off (DVD) Review [http://thedvdreport.blogspot.com/2006/07/ferris-buellers-day-off-dvd.html].

Below are a few more great Weird 80's Music deals on Amazon:

First Look: Midnight Spin
If you are looking for the next super-stardom band, keep an ear out for Midnight Spin. They are barreling down the musical umbilical cord looking for an exit. And when they get it, they are slated to explode onto the scene, ripping and tearing a new path to musical richness.

Sub Pop Music

Iron and Wine our Endless Numbered Days Rock Music CD Review

The super talented group Iron and Wine have released their most recent CD on the Sub Pop Records recording label, entitled Our Endless Numbered Days.

It's a rare day indeed that I get a CD from an artist that I can truthfully say does not have a bad track in the bunch. I'm more than happy to announce that’s exactly what I must say about this one. There simply is NOT a bad one in the bunch. No fillers here at all, with each song standing tall on it's own.

Our Endless Numbered Days has a nicely varied, mix of 12 tracks that are very well written and brilliantly performed songs by these clearly outstanding musicians. With many of the songs displaying a lot of the kind emotion that makes for a really great listen. Clearly drawing from what I can only imagine are their own real life experiences. At different points touching on the most real emotions of love, heartbreak, pain, failed relationships and unattainable romance. They’re all here.

If you’re a Iron and Wine fan this is a CD your collection flat cannot be without. In fact, this is one of those CDs that you don’t even have to be a fan of lname, or even Rock to know is good. It’s just good music. Period.

While the entire CD is really very good the truly standout tunes are track 2 - Naked As We Came, track 9 - Free Until They Cut Me Down, and track 12 - Passing Afternoon.

My Bonus Pick, and the one that got Sore [...as in "Stuck On REpeat"] is track 1 - On Your Wings. It’s a great track!

Our Endless Numbered Days Release Notes:

Iron and Wine originally released Our Endless Numbered Days on March 23, 2004 on the Sub Pop Records label.

CD Track List Follows:

1. On Your Wings 2. Naked As We Came 3. Cinder And Smoke 4. Sunset Soon Forgotten 5. Teeth In The Grass 6. Love And Some Verses 7. Radio War 8. Each Coming Night 9. Free Until They Cut Me Down 10. Fever Dream 11. Sodom, South Georgia 12. Passing Afternoon

Iron & Wine: Sam Beam, Sara Beam, Patrick McKinney, Jeff McGriff, EJ Holowicki, Jonathan Bradley. Recorded at Engine Deck Studios, Chicago, Illinois in 2003.

About the Author

MGM Cane Furniture Specialist
Scotland's Premier Online Garden Centre stockists of quality cane and garden furniture, conservatories, garden buildings, canspa spas, concrete garages, barbecues, giftware, pets, reptiles and aquatics at discount prices with free UK delivery.
http://www.cupargardencentre.co.uk/acatalog/MGM_Cane_Furniture.html

Here are a few Sub Pop Music listings you might enjoy:

Product leaks online are often enough to generate interest on a mobile phone which the makers can gauge right away. There's the Robyn Android handset circulating the rumor mill before the 2010 Mobile World Congress and true enough, it got confirmed with the announced Sony Ericsson XPERIA Z10 Mini.

As the name clearly indicates, it's a mini version of the much awaited XPERIA X10 announced last November and has yet to be released. At a glance the Mini looks like a real junior with a diminutive body measuring all of 83 x 50 x 16 mm and weighing 88 g. This could make it the smallest Android smartphone in the market and should attract a wider market wanting a really convenient pocketable smartphone with all the features, never mind if they're not as lofty as the X10's superb features.

It certainly will appeal to a younger crowd as confirmed by its availability in six different colors of red, pink, lime, silver, pearl white and the more common black. It should be available in the 2nd quarter starting April when the XPERIA X10 finally gets released under Vodafone UK.

Mini Features

As a junior version of the X10, its understandable that its feature set won't hold up to daddy when compared with it, but taken on its own, the Mini is a competitively stylish and competent Android smartphone despite running the older Android 1.6 Cupcake with the Rachel/UX user interface on a less muscled Qualcomm MSM7227 processor clocked at 600 MHz.

The Mini is a quad band GSM/GPRS/EDGE phone on the 2G network for world wide roaming and a 3G phone on the dual band UMTS with HSDAP/HSUPA for high speed internet surfing. It also has WiFi 802.11b/g for hotspot surfing and the usual complement of Bluetooth 2.1 with A2DP and microUSB 2.0 for local data connectivity. It also has SatNav functionality from an A-GPS receiver with Google Maps.

Their main obvious mini feature is a reduced screen size at a sub-par 2.5-inch TFT capacitive touchscreen display. It has QVGA resolution and 16 million colors, a gravity accelerometer for auto rotate viewing and an anti-scratch glass surface.

Its imaging comes with an above-average 5 megapixel autofocus camera with LED Flash, face/smile detection, geo tagging from its A-GPS receiver and VGA video recording at 30fps with video light. Entertainment gets the usual media players for popular audio and video files formats with TrackID music recognition, an FM stereo receiver with RDS. A2DP and 3.5mm headphone jack.

On the apps front, you get Google Search, Google Talk, Google Voice Search push email, IM and a web browser with Flash Support for YouTube. You also get a document viewer for PDF and common MS Office files as well as Timescape and Mediascape.

Phone memory is a paltry 128 MB but you get microSD expandability of up to 16 GB. The retail kit will include a 2 GB microSD card. There's also a standard lithium polymer battery the promises up to 4 hours of talk time in 2G and a standby time of up to 285 hours on single charge.

To find out more about the Xperia X10 Mini pay a visit to moby1. They compare contracts for the Sony Ericsson Xperia X10 Mini and many other phones.

Below are a few more great Sub Pop Music deals on Amazon:

Go Guide: Surfer Blood, The Hukilau, Playboy and more
The rep of the oft-dismissed South Florida music scene could change just like that . Ask Surfer Blood , which in less than a year went from a few West Palm Beach guys standing around talking music at a party to a Pitchfork-buzzed band with a show at the prestigious Leeds Festival on their summer European tour.

80's Music Covers

Any neat music to work out with?

I do treadmill cardio for an hour and a half a day. I prefer music with a serious beat to keep me motivated. I think I've covered the basics. Current Top 40, Queen, Grease, Footloose, Dirty Dancing, Top Gun, 60s R&B, and light 80's. I'll list more later.
Can I get specific titles with Singer/Band. Thanks!

Led Zepplin
Beastie Boys
Jimmi Hendrix
Eminem
Rage Against the Machine

Just to name a few on my I Pod

Here are a few 80's Music Covers listings you might enjoy:

Cover Bands And Why We Love Them

A cover band is a music group that performs songs originally produced by other famous bands. Sometimes, they dress like the original band, take on their persona, and rock out like the classics. Some of them name their group as a spoof to the original and come up with creative names like Odyssey instead of Journey. Cover bands are different than a band covering a song from an original artist. Cover bands strictly perform the band they are trying to emulate. Some bands that are trying to make their way into the music industry will do a cover of a song from a more famous band, but rerecord it to make it sound like their own.

Some cover bands choose the tops songs from a certain decade to perform. Rotel and the Hot Tomatoes is a cover band the goes through three decades during their performance and have costume changes for each decade. They play the top hits from the 60s, 70s, and 80s. Another successful cover band that performs hits from a certain time era is the Three Dog Night band. They cover a variety of songs from the 60s and 70s. A fun place to go in Austin, TX is the Cedar Street courtyard where you can see the band called the Spazmatics perform 80s hits.

While some cover bands focus on a particular decade or decades, other bands that do covers focus on a single group. They are often called tribute cover bands. A popular tribute band that covers all the greatest hits from the original band called ABBA is called Gabba. A tribute band that performs only Beatle’s hits is called the Egg Men, and they got their name from one of the Beatle’s songs. Tribute bands are so fun for people who had loved the original band back when they were in their prime. Some bands don’t tour anymore, so fans will watch tribute bands to hear their favorite music live.

Besides covering bands from a certain decade or specific band, some groups will perform a cover and change the genre of the original song. For example, Trans Siberian Orchestra performs traditional classical style Christmas songs and turns them into rock songs. Some jazz artists will take a famous rock song and play it on an instrument like a saxophone or a piano to change the genre of it.

On a different scale, there are also a lot of impersonators that act exactly like an iconic star. You have probably seen these folks in Las Vegas or Hollywood. Perhaps the most famous person to be impersonated is Elvis Presley. Other iconic stars are also impersonated like Cher or Madonna. Some impersonators just walk around the street acting like the original star, and others perform shows and concerts.

About the Author

Jeff Bachmeier is owner of 977music.com, an online music and online radio station network providing live streaming Internet Radio channels with music from the 50’s thru Today. Users can also choose to create their own customized on demand playlist through their own social media profile. For more information please visit http://www.977music.com.

Below are a few more great 80's Music Covers deals on Amazon:

Times change, song remains the same
The Village of today is a place of chain stores, condos and apartments with sky-high rents. This was once the place where — as documented in Bob Dylan’s “Tangled Up in Blue” — there was “music in the cafes at night and revolution in the air.”

80 Music Cd Collection

How much can I get for my HP 754n Desktop?

I have an HP 754n Desktop computer. It has the following:
*Windows XP/Service Pack 3
*80 GB hard drive
*1 GB of RAM/Memory
*DVD Writer/CD-ROM Drive
*Intel Pentium 4 Processor
*Processor speed of 2.53 GHZ

It has always run great. I have a huge music, picture, and video collection. I've always taken good care of this PC, which I think it's why it's in great condition. I got it in the beggining of 2004. I never had any problems with it. I'm selling because I'm getting a new PC. How much do you think I can get? Thanks in advanced.

It has very good specs.

But, if you want a quick sale, the most it will sell for is 220.

You can buy a modern desktop for about 300 dollars nowadays.

I don't suggest you sell this on craigslist. People are cheap on there. Try to sell it to someone you know, or a friend of a friend.

Here are a few 80 Music Cd Collection listings you might enjoy:

sharing my hi-fi experience and endeavors

Sharing my Experience & Endeavors in Hi-fi stuff…   No system on earth sounds 100% as real live   I can say there’s no hi-fi system in the world that sounds real perfect like 100% as live no matter how high the price you’re going to pay for it. There’s no system on earth with no distortion, which can get real perfect sound quality, placements and accurate phase, spatial information of the live audio image. Do you know the reason why? You can find the answers here below.   So, don’t just get superstitious with some branded ones no matter what, don’t just be persuaded or misled by some sales representatives, dealers or advertisements, what they’re doing is marketing or selling out products on behalf of some manufacturers and get their profits out of sales. No one can guarantee you the sound quality and accurate phase of any audio image of any system that can reproduce which you’re going to buy. Furthermore there are no CDs that can sound real good, and then what do you can expect?   Training up your ears   ***Training up your ears is real helpful to yourself in selecting the systems you’re going to buy rather than listen to what those salespersons say or persuade, then use your listening experience as a standard to determine what to buy. Your ear is a good piece of testing instrument, as a common user or audiophile; you can hardly find any testing instruments to get findings of what the system can perform.   Live performance with instruments as a standard   ***Try and listen to live music with instruments like piano, violin, cello or drum, etc. for a certain time, and get used to it and pay attention to how they sound, all these instruments sound with vibrations, and then try to memorize them. In case you’re listening to music with instruments reproduced by a certain system, and then compares every detail of the sounds reproduced with the sounds of the live instruments that you can memorize. This is the only standard and the only way not to select a wrong product and to make every single cent out of your pocket worthy of its value.   Of course, there’s nothing in the market that can satisfy you, but you may get the one as close as live and do the things as I suggested here. After that you may enjoy reproduction of music really much. Furthermore, if you know how to burn a good CD or DVD Audio disc, you’ll feel like heaven.   That’s the reason why I want to share my experience and endeavors in hi-fi stuff with those audiophiles who are interested in it. And it took me 10 years during my pastimes to study and find ways to get the sound and the system improved.   By doing the things I suggested here that can save you lots of your time and money; and of course, you must pay lots of your own effort, otherwise you can’t get real good sound at all or you’ll never know how good your system can sound. No hard work, no gain. After that you can feel how strong the power of your system can be, and your system could handle songs of symphony orchestra like live performance, believe it or not… Only the truth survives the ages.   For one thing, if your system is a DIY one, there’s still a lot of room to get it improved. Or else, there’s only little room to get your branded system improved.   How to rate your system?   Most branded systems said and were tested to perfection or output to be linear, but they don’t sound as what they should be, some are even unbearable. It’s really hard for one to select a real good system. First of all, you must know how to rate your system or the system you want to buy. You can’t get any CD to test on at the moment especially at the shop. You can turn up the volume at a higher level, and then if the sound gets annoying, it means the system shall have a certain distortion.   Secondly, if you have experience in certain instrument, you may listen to a few CDs with such instrument and then compare the sound with the live instrument, then you would know how to make a decision to buy.   Burning CDs or DVDs will sound better than originals   After you’ve chosen your dream system, then what else can you do to get the most or best out of the system? Burning a good quality CD or DVD will get the sound or video quality improved. Of course, not every PC can get your burning improved; some might even get worse than the original. It’s because the same problems happened to your PC as the hi-fi system has.   Before you’re trying to burn or back up a CD, you must buy a good quality PC, then do the enhancements as I recommend as you will do to your hi-fi system. Shielding up your PC can also help improving the way it works. When you read on to this article, you may get some ideas on how to enhance your PC before you’ll use it to burn or back up your CDs or DVDs.   To me, I would prefer burning DVD Audio than CD as it sounds much better than any CD anyway as I do concern the primary source of audio image.   What are the problems?

 

Electromagnetic flux, magnetic field, vibration of transformer, vibration of revolving mechanism with a CD player or LP turntable, laser reflection and refraction, vibrations of drivers causing coherent vibration of the whole loudspeaker, vibration caused by EMF, EMI Noise, high resistance, high impedance, etc., cause lots of problems to your hi-fi system whenever you’re turning them on. Some inferior circuit design of amplifiers may also cause harmonic distortion. As a result, your system and loudspeakers can’t get to the appropriate frequency response as stated with the specification in the manufacturer’s manual. What you would feel the sounding is like getting so thin and without as many details as a real instrument should be.

 

You know what? It means that no matter how dear your system is, you’re buying lots of problems at real high cost along with the hi-fi system you’ve bought, ha-ha...

 

Don’t get disappointed

 

Don’t get disappointed, I have studied and found ways to solve most of the problems and want to share with you guys. Should these problems be minimized as I suggested below, your tube system with a CD or DVD player at real low cost may sound real good and works much better than a system with the black LP turntable. Of course you must pay much more effort or hard work on your own than you can imagine. Believe it, or not…

 

Some expensive systems may cost you a lot only with just a little improvement in the design with the series whatever named ‘Monitor’, ‘Reference’, ‘Signature’, ‘Mark I’, ‘II’, or ‘III’, etc., but you have to pay for a lot more than what it is really worth. Some systems of higher marking, ranking or power output might even sound much worse than the previous versions. But for those who only crave for some branded systems, I’m surely sorry no one can help.

 

***You may doubt what I’m saying here. Those branded manufacturers do know what the problems are as I know, but they would only ask for a much higher price for a certain design with just a little improvement.

 

 

 

What is Electromagnetic Interference?

 

Electricity creates electromagnetic interference that is a common problem in which electromagnetic flux (EMF) interferes with the proper functioning of an electronic system like CD or DVD player, PC, recording system or any electronic components, especially those with PCBs whenever you turn on every piece of component of the hi-fi system.

 

And you can also find electromagnetic field in every corner of the Earth, we’ve got no way to eliminate EMF, all we can do is just find some ways to reduce such EMF impact by altering its path along all the cables in order to get the system improved in some way.

 

Electromagnetic flux starts from the power station when electric current moves along cables which may be far away from the area where you’re living and finally gets into your loudspeakers, and any video, audio systems or recording system within your house or premises shall be distorted whenever you’re turning them on. This also causes vibrations when you’re turning on any systems.

 

These interference problems can range from an annoying jitter of the electrical signals in either digital or analogue or images on a screen of a monitor or television, hi-fi system or recording systems including editing system and mixing system, etc., especially solid state ones, to very serious and costly problems with complex electronics.

 

And then this will tense up the tone of sound output of the audio system and the color images of the television or the computer monitor which are very annoying and cause the loss of details in both video and audio quality of full ranges no matter how expensive or how good your system is. That’s the reason why you can’t even turn up the volume of your system especially for those solid state amplifiers.

 

You may also refer to the relevant info at the path below:

 

http://en.wikipedia.org/wiki/Electromagnetic_interference#EMI_in_Integrated_Circuits

 

Systems in 4 main categories                           Interference caused by EMF

Glass Tubes with Hard Wires                              Moderate distortion – Simpler hard wire circuit with low output of about 8-watt thru the output transformer; some system of higher output will lead to lower sound quality. That’s why this sounds better than the 2 systems below though it’s still not good enough. This kind of systems may sound sweet in vocal though it’s not as real as live, then the treble and bass would get too soft.

 

The most famous model for this is McIntosh MC240, 6L6, push-pull, 40-watt output of each channel which was manufactured in the 60’s. Most people comment that it sounds real sweet, but there’s one thing I don’t like is the small tubes 12AX7 with the system and it can’t handle the bass well.

 

According to what I’m expecting from what a system can sound real as live instruments, it’s not up to my standard as well.

 

Glass Tubes with PCBs                                       High distortion – We call this a modern tube system as it applied PCB instead of hard wire, and it still sounds better than any solid state system,            generally speaking, but it also has higher   distortion than any tube system with hard wire circuits. If you’re an experienced audiophile, you won’t accept this at all. The modern McIntosh MC240 is of this kind, much worse than the hard wire version of McIntosh MC240.

 

Solid State with complex PCBs                            Severe distortion – Being too complex with the circuits on PCBs and getting interfered by EMF at least 2 or 3 times higher than tube systems with Hard Wires; the higher output like 100-watt or above of the solid state system, the severer interference which distorts the sound quality badly and causes loss of more details, and it’s not environmental friendly as well.

 

Any system made this way shall have higher distortion like at least 2 to 3 times higher than any tube system, and doesn’t please your ears at all.

 

Solid State - Vacuum Tube Hybrid                       Seriously Unclassified - I can say systems made this way never appreciate anyone’s ears.

  Golden Rules...

 

All these methods of shielding and reducing EMF, vibrations, applying wave absorbent, etc. below can help improve your hi-fi systems, recording system, editing system, personal computer, monitor, television set, and then you can find your TV set works better, your hi-fi systems sounds better and your PC works better than ever you can dream of... And you can’t get a real perfect system without such concerns. Or else, you’ll never know how good or how bad your system is.

 

Ha-ha… Money just can’t buy. Reducing electromagnetic flux and vibrations are real critical to both the video and audio quality of your system.

 

What I’m doing... Trials and Errors…                                                                                        What I'm doing isn't what people or people in the trade say, because most people say what they think which doesn't mean they understand what it really is. It all depends on what you have tried, found and proved what is right or wrong.   Sometimes what people say may fool you around and mislead you to a state of total waste and loss of time, money and fidelity; and you may spend a lot more money than what it’s necessary, or you may then change from a system to another system, a cable to another cable and a component to another component, a pair of loudspeakers to another pair of loudspeakers, you still can’t get what you really want and feel lost. I think most inexperienced audiophiles have the same experience as started at the very beginning.

 

Furthermore, marketing a product with a real good attraction or image doesn’t mean the product itself can give you full satisfaction in sound or video quality. Some marketing strategies don’t really care if the quality of the products itself is good enough or not, they’re just selling things out for the profits they concern. A successful marketing strategy in some way to promote some expensive and junk hi-fi systems may mean harm to audiophiles. Ha-ha...

 

That’s why all you’ve got to do is study why and how you can improve the system at a real low cost. At least I've found that vibrations, magnetic field and electromagnetic force, etc. don't do any good to any audio or video signals in digital or analogue formats and also badly affect the performance of the whole hi-fi system. Then I'm going to understand why most systems don’t sound really good and find some way to solve the problems...

 

Of course training up your ears in listening to some live music with instruments is also crucial to yourself, this can be used as a real standard which nothing can replaced. Then you would find if the system has improved or not after doing a few shielding, otherwise you’re not sure if the system has improved or not.

 

You now can get to learn more of things relating to electricity and EMF from Encarta, Microsoft Corporation.

 

http://encarta.msn.com/media_461518050/Electric_Power_System.html

 

Right-Hand Rule 

 

 

You can visualize the magnetic field created by an electric current flowing through a wire using your right hand. Point your thumb of the right hand in the direction the current is flowing and curl your fingers as if making a fist. The magnetic field curves around the wire in the same direction that your fingers curl around the axis defined by your thumb.

 

1) Wave of electromagnetic energy: a wave of energy with a frequency within the electromagnetic spectrum, generated by the periodic fluctuation of an electromagnetic field resulting from the acceleration or oscillation of an electric charge. Electromagnetic waves can be reflected, refracted, and polarized, and exhibit interference and diffraction effects.

 

2) Area of electric and magnetic forces: a field of force associated with a moving electric charge and consisting of electric and magnetic fields that are generated at right angles to each other.

 

***The above impacts do affect the video and the audio quality of your system badly. Some branded manufacturers do know about and concern all these problems but what they can do is little due to higher cost of production may arise which also affect their sales and profits.

 

That’s why branded systems can only have little room for you to get them improved. And you have to pay a lot for only a little improvement with your systems and it doesn’t seem justified.

 

1) Power Section:

 

Electrons

 

Electron, negatively charged particle found in an atom. Electrons, along with neutrons and protons, comprise the basic building blocks of all atoms. The electrons form the outer layer or layers of an atom, while the neutrons and protons make up the nucleus, or core, of the atom.

 

Electrons, neutrons, and protons are elementary particles—that is, they are among the smallest parts of matter that scientists can isolate. The electron carries a negative electric charge of -1.602 x 10-19 coulomb and has a mass of 9.109 x 10-31 kg. “Ha-ha… They're just too small, that's why we must find ways to treat them well.” “Or else… I’m sorry.”

  Transformer   No matter what shape the transformer is, EI or toroidal with acute current as it vibrates when you turn on the power; it must be shielded and sealed up or separated apart from the working part with direct current. All transformers vibrate as the electric current interacts with electromagnetic means which also creates electromagnetic interference that affects any electronic systems or devices such as hi-fi system, loudspeakers, PC, recording system or TV set, etc. nearby. I have also shielded up or separated up all transformers as can be, lest EMF interfere other working parts.   Most tube systems would place the transformer on top of the chassis, in this case, transformer won’t interfere the working part directly and severely. While solid state system with PCBs would only placed the transformer within the partition inside the chassis, thus interferes the working parts which severely distort the video and audio quality of the system.   Grounding up the transformers   All transformers, such as isolation transformers, chokes, including power transformers, output transformers have to be grounded to the metallic chassis, and then the noise and interference of EMF will be somehow reduced.   Po Shan (??) Transformers

 

It's not easy to get good quality transformers as there are some good ones though they're expensive from U.S.A., Japan or England, but you still can get some good quality transformers here in Hong Kong as well, the mill called Po Shan Electronic Co., Ltd. Most of the DIY-ERS here in Hong Kong know where the mill is. And all the transformers I’ve used are made to order by Po Shan as well.

  Sealed Transformers

 

All transformers, no matter it is a choke, a power transformer or an output transformer, shall be sealed up by iron cap or ironclad, and then electromagnetic force won't leak out as much which distorts the whole system.

  Chokes   A choke is necessary for filtering electric current, it does real good to the power parts and the electricity thereafter will become more linear or stable.   Electric field & Electromagnetic force on Printed Circuit Boards   Printed Circuit Boards (PCBs) are largely employed for building solid state systems and they're real compact with parts indeed, that's why any system built with this method tends to have higher interference caused by electric field and electromagnetic force which badly distorts the sound and image quality of any system as flow of electrons occurs.   You may also refer to the article at the link below:   http://en.wikipedia.org/wiki/Electromagnetic_interference   As for CD/DVD player and D/A converter, PCBs are just fairly acceptable as the working voltage is real low. If PCBs are employed with solid state pre-amp and power amp, the sound quality of this is totally unacceptable when compared with tube glass system with hard wire circuit. That’s the main reason why solid state amplifiers don’t sound good at all.   That's the reason why most modern glass tube systems built with PCBs never sound as good as the traditional glass tube systems built with hard wires, not to mention any solid state systems.   Of course you can also shield up every PCB, every inch of cables and apply appropriate partitions as you think fit in order to improve the sound and video quality. I have never found any system with shielded PCBs. In my case, I do shield up all the PCBs as can be.   Power cables

 

Power cable is real important to your hi-fi system and it’s the 1st criterion that you must concern. As the power cables provided by some manufacturers are mostly in ordinary or inferior quality which doesn’t do well with any electronic systems. That’s why I must make them on my own.

 

Every power cable I'm using is silver-coated copper bought in Shamshuipo, then made and designed by myself; I’ve shielded up every wire of live, neutral and earth with aluminum foil individually and wrapped them up with insulated tape separately. After that I have also braided them up with some metallic cable to alter the path of EMF. The more shielding and braiding you put on them, the more great sound your system can get.

 

e Isolating these 3 wires with 3 sockets will get your system improved in sound and video quality as well.  If you’re doing so, of course it’s taking up space and you would need a few power boards to get a better result. I can say there’s no such branded products made this way no matter how expensive they are.

 

Moreover, I would then add an EMI filter to each of the power cable to further reduce the EMI impact to each component of my metal tube hi-fi system, it sounds real great that you can’t imagine.

 

If your system is safe enough, the earth wire isn’t necessary and can be removed as it might cause interference from outside to your system. Of course, my system is safe enough to allow this removal of the earth wire.

 

***In case your want to remove it, you’d better check with an electrical technician to make sure if it can be removed or disconnected. In my case, I removed all the earth wire of all the power cables I have made.

 

You know, a good power cable is especially necessary for any electronic components such as CD/DVD player, D/A converter, tube buffer, tube pre-amplifier, tube power amplifier, PC, monitor screen, TV set, recording system, etc., as they’re very sensitive thru power to signals.

  Furthermore, I’ve also shielded up the power cables for the isolation transformer and the surge block filter to minimize EMF as can be.   How to treat electrons well?

 

An isolation transformer, surge block filter and an EMI Noise filter will improve the manner that electrons work with protection of isolation from outside and if it’s with every inch of wire within or along the system being shielded and braided up, and then the sound and image quality get improved. And it’s such a big task.

  e If your isolation transformer has an option of input and output at 240-voltage, you can use this option instead of an option of input and output at 220-voltage; at this option, it’s still 1:1 in ratio which doesn’t change the power of input and output at 220-voltage. It further enhances the isolation of electromagnetic interference coming from the outside as you fully employ the whole coil of the transformer.   And I also suggest to get a much higher power output for the isolation transformer, in my case, it’s a 3,000-watt output; it’s the higher, the better.     Power Distortion   Generally speaking, tube audio systems shall have less distortion than any solid state audio systems, the higher the power output, the worse the sound quality caused by distortion due to electromagnetic flux interference ever starts from the power station far away from the place where you’re living. Some manufacturers would design some branded products with power output of 1,000-watt each channel, but they don’t sound real good at all.   EMI Noise Filter   An EMI Noise filter is a real good part that is necessary and crucial for any CD or DVD player, D/A Converter, Pre-amplifier, Power Amplifier, Television, Computer, or any recording system, editing system, etc. as it reduces EMI Noise thus the electric current gets stable & linear before going into the component. I’ve put one each to each of my component and the improvement is crucial. Should you apply it to any component of the system and find the sounding isn’t as good as before, it means that there’s something wrong with the whole system.    EMI Noise Filter shall be applied to those digital components of hospital grade. I do recommend this to be applied to the power section of your hi-fi system or any components both for audio and video output.   Power Surge Block Filter   Surge Block Filter is also necessary to your system and it also protects your system from damage due to sudden power increase during thunderstorm that may have the risk of burning your whole system up or so.   Separation of Power Transformer   Some mill would separate power parts such as transformer, regulator, and stabilizer with an individual chassis other than the chassis for the working parts such as amplification. By doing so, this can also reduce the problem of EMF caused by the power parts which interfere the working parts which processes the digital signal concerns especially for the CD/DVD player and the D/A converter. If the situations and conditions allow such, I suggest separating all power section or part with an individual chassis other than the one with processing parts.   2) Cables Section:                                                                                               e 2 Uni-axial Cables replace 1 Interconnect Cable

 

Every interconnect cable that I'm using is just a single axial cable which must be shielded up, one for the positive and another for the negative pole only to replace traditional RCA interconnect cable, then I have to make and design my pre-amplifiers and power amplifiers with more RCA jacks to fit this purpose. Traditional RCA jack isn’t a good design as the positive pole will be affected by the negative pole when electrons move along while the system is working.

 

Normally most amplifiers with 4 RCA jacks, 2 for the left channel in white, and 2 for right in red including both input and output, but I have to make 2 more female jacks for the left channel and 2 more for the right channel. By doing so, your system sounds incredible because electromagnetic flux impact will get less severe.

 

There’s no such product on earth you can find with 2 more jacks for negative pole of input and output each channel, rite?

 

 

Microphone cable

  It’s crucial to have all 3 wires shielded and braided up separately for the microphone cable as well. It does reduce coloration and give better recording result.   RGB Coaxial/Component Cables  

You may refer to the photo of the cable below I posted for making RGB coaxial cables, 3 of these can make 1 good quality RGB coaxial/component cables. Most products of this in the market are made in a bundle which each of the cable represent a color will get interfere one another, but if you make it separately like 1 for the red, 1 for the green and another for the blue with shielding and braiding which will give you real good colors and video images. A single one of this even does real good as a coaxial digital cable for digital signal transmission or interconnect cable for analogue signal transmission.

 

 ***This cable ideally carries positive and negative signals with 2 separate metallic mesh shielded wires which gives a more ideal audio or video image. After that I would also braid it up separately to further reduce EMI as electrons move along. I would also apply 2 e uni-axial cables in between my pre-amplifiers and power amplifiers to replace the traditional one as shown in the picture.   HDMI Cable

 

HDMI cable carries both digital video and audio signals in a bundle which they would interfere one another and distort the true quality of each signal. Of course, that’s for sure digital signals work better than analogue.

  Cables with less than 50 or 75 ohms

 

Every cable I've made has fewer ohms than any other branded ones with 75 ohms. I have tried some good brands with specification of 50 or 75 ohms but it doesn’t sound as good as the ones I've made with real fewer ohms.

 

Silver-coated Cables                                                                                                    

 

All the cables I'm using including power cables; interconnect cables and loudspeaker cables are of 95% silver with 5% gold or silver-coated copper which has higher conductibility. If all these cables are not shielded and braided up individually, they won’t work as good at all.

  Length of cables, the shorter the better                                                                                              

 

All cables such as power cables, speaker cables, inter-connects, coaxial cables, etc. should be the shorter the better as it would have less resistance and lower chance of being distorted. Long cables shall have higher resistance and higher impact of being interfered by EMF within the environment such as magnetic field or electromagnetic flux that surrounds your system.

 

What is the best conductor for cables?   Silver is the best conductor for transmitting electrons, especially it’s a single strand. Even if the cable is made of silver without shielding, it won't sound any better. I don’t suggest using pure silver as it easily gets oxidized.   Shielding and braiding up every inch of wires and cables...

 

As long as you would shield and braid up every inch of the wire or cable including those inside the system you're using, it gets improved a lot, and the phase of the audio image will get more accurate. But it's just one of the golden rules that can improve your hi-fi system.

 

Shielding and braiding can’t remove or eliminate all of EMF; it just changes the way and path that EMF moves from the electricity power outlet from the wall, along the cables or parts within the whole system which is distorting the video and audio output quality.

  Here you can take a look for reference at the site below:   http://www.rane.com/note151.html   Braiding up the cables   You may braid up all the cables after shielding with aluminum foil for further enhanced improvement in sound and video quality and performance of the whole system.   The site below is showing you how to braid up cables:   http://www.chimeralabs.com/diy.html   In my case, I’ve applied these 2 methods for all the cables I’m using such as power cables, coaxial cables, interconnect cables, and loudspeaker cables. This is a real good method to make a good quality cable. You can apply these 2 methods to all the cables for your components, and then it could be the best cable in the world, ha-ha…   Cables within the system   Most cables within some branded system are nicely and neatly arranged and tied up in a bundle, but this is not a good way to tie up those cables. The EMF incurred along each cable may interfere with one another. Thus, any system made this way causes loss of details and won’t sound any better.   Remarks: All cables shall be duly separated, don’t ever let the positive end get touched with the negative end. Especially, cables that carry digital signals such as coaxial cables which shall be separated away from the power cables.   3) CD/DVD Player Section:   DVD player after shielding and blacking out sounds much better than CD player.

 

The 2nd criterion is the quality of CD/DVD player as it’s the source which affects the sound a lot to the whole system. After shielding up the cables within, the power cable and blacking out my DVD player with a black magazine, it sounds better than some CD player without such treatments. By doing so, it doesn't cost much; it’s much less you having to pay than the cost you pay for a certain modification with some parts of your CD player.

 

‘Moon Harbor’ HDMI DVD player - JungSon (??)

 

The player I'm using is a Chinese made DVD player called 'Moon Harbor' HDMI 1080i DVD player with a black magazine, it plays DVD, CDs, etc., this is a real good one when compared quality with dollars and its weight is heavy enough, and it sounds real good too. And I can say, it sounds much better than many famous foreign branded CD players. This player can also play DVD audio discs which sound much better than any CDs.

 

You know I’ve also blacked out the chassis inside and shielded up the power part and the working part as well. After that it sounds even much better. This component is worth every cent to the sound quality it can give you.

 

http://www.jungson.com/content/product_pages/dvd.htm

   'Moon Harbor' HDMI 1080i DVD player, its chassis is real strong and heavy. And I have blacked out the chassis with proper shielding and partitions inside, and then put some weight on top of it which further reduces the vibrations caused by the revolving mechanism.   Weight on CD/DVD player

 

You might put some weight heavy enough on your CD/DVD player to minimize the vibration caused by the revolving part of the drive mechanism and the transformer which cause jitter distortion to the reading of signals. It’s better to put iron weight on it.

  DVD Audio Disc

 

Ulead DVD MovieFactory 6 burns music DVDs treated with LPCM that gives real great sound quality which also sounds better than any CDs or LPs. You can download a free version for trial at the path below. In my opinion, I would rather burn a DVD audio disc rather than a CD. That’s why I seldom burn any audio CD anymore.

 

http://www.corel.com/servlet/Satellite/us/en/Product/1173965700866#versionTabview=tab0&tabview=tab0

  CDs to LPs

 

Most people say CDs don't sound good, while LPs sound much better. It's because they somewhat misunderstand the way electrons work in the hi-fi systems and the technology in the 80’s for making a good CD wasn’t yet there. If you have applied all these methods I suggested here, your tube system will for sure sound better with a CD player than a system with an LP turntable.

 

Actually there are good and bad in both CDs & LPs, but there's much more room for you to improve a system with a CD player with a black magazine than a system with a LP turntable.

  Jitters Correction Software - Nero Burning Rom 6

 

Nero Burning Rom 6 has a function of jitters correction which does real good in burning your CD-ROMs. You are suggested to use this software to copy and back up your CD collections. Your burnt CD-ROMs will sound better than any original CDs.

 

http://www.nero.com/ena/downloads-nero6-update.php

  Black is everything...                                                                                                   

 

If you have a CD or DVD player with a black magazine, you're lucky... or else, can't help improving. You know most professional stuffs come in black. Black is the color which doesn’t reflect and refract any color.

  Blacking out the CD or DVD players

 

If you're not going to sell out your CD player, you can try and find ways to black it out. If the CD or DVD player is of gold or silver colored chassis and looks good but without a black magazine, I can say I am sorry, it won't sound any better.

  4) Digital/Analogue Converter Section:

 

Digital/Analogue is the 3rd criterion to your system as its quality should be better than the D/A within the CD/DVD player. An external D/A converter will work better than an internal D/A converter inside a CD or DVD player, I do recommend Zhaolu (??) D2.5 which is a 24-bit D/A converter as it sounds real good at a very cheap price, much better than many branded ones. Ha-ha...

  After I’ve shielded up every single wire and PCBs of different sections inside, it sounds terrific as well.   http://www.zhaolu.com/products/d25/big1.htm    Zhaolu (??) D2.5 is a 24-bit D/A converter; I have also shielded up every piece of PCBs and wires with partitions inside. One must applied an EMI filter to any D/A converter.   5) My metal tube 6J5 buffer   I would like to apply a tube buffer right after the D/A converter and before the metal tube pre-amplifiers in order to enhance the sound quality by the metal tube 6J5, one mono tube works for one channel, much better than those branded ones using one stereo tube for both channels because each channel within a stereo tube may get interfered each other.   Tube buffer is placed within the D/A will certainly not sound good, mostly soft and fat. 6) My metal tube 6J5 pre-amplifiers   I would like my tube pre-amplifier to have an amplitude of e20-time to get the most of details of the audio source, and the metal tubes 6J5 I applied are good for such design while most branded pre-amplifiers would apply an amplitude of about 10-time instead. And I don’t use traditional interconnects as I’ve designed e uni-axial cables for my tube pre-amplifiers and tube power amplifiers. Guess you can’t find any product like this in the market, Ha-ha...   7) My metal tube 6L6 power amplifiers   My power amplifiers are of output loading below 8-watt, the power of such output is good enough for an area of room from 80 to 100 sq. feet. Its sound is so dynamic and giving you every bit of details of the audio source as well. The output loading of the output transformers for these amplifiers are of 60-watt each channel, but the actual power output for the tubes are less than 8 watt each channel and you won’t find any problem of electromagnetic saturation with it.   Loudspeakers Section:

 

Crossovers at the 4th order for tweeter, mid-range or woofer individually

 

If your loudspeakers have 3 drivers for each channel, the crossovers designed should be made separately with shielded partitions, one for the tweeter, and one for the mid-range and another for the woofer. Furthermore, you can shield up coils and capacitors which the cross-over will work precisely. I do recommend designing the crossovers at least at the 4th order or above.

  Crossovers placed externally & are shielded up as well.

 

I would suggest the crossovers shall be placed outside of the loudspeakers, and then the loudspeakers would sound much better because magnetic field of each driver may distort the sound quality. And if they are shielded up as well, the high range won’t get interfered by the electromagnetic flux of the mid-range and the mid-range vice versa, and then the phase of the audio image will get improved a lot.

  Sealing up magnets of drivers  

All magnets of drivers shall be sealed up by iron cap which will hold up magnetic field, thus it will reduce the magnetic field and electromagnetic flux impacts to the working of crossovers and other drivers, and then the sound quality of the driver will also improve a lot. 

  Eton drivers

 

Eton drivers from Germany are real good; they can perform with all the details at high definition with good frequency response from an audio source and whatever you need. If you shield them up as I suggested, they perform real great sounds that please your ears. I used these drivers to make a pair of loudspeakers with crossovers at the 4th order; they sound real good and perform well with feel of being live.

 

And it’s not enough; I still need shield up the magnets of them with iron sheets which gives real dynamic and nice sounding.

 

  This loudspeakers were designed by my friend, Mr. Bill with the 4th order crossovers placed outside of the chassis and the Eton drivers. I have shielded up cables and the magnets of the drivers which enhance the sound quality.

 

You may visit the Eton’s website at the paths below:

 

1) http://www.eton-gmbh.de/ShowPage.php?NavRoot=0&LangId=2&NavLang=2&PId=3&NavId=61

 

2) http://www.eton-gmbh.de/ShowPage.php?NavRoot=0&LangId=2&NavLang=2&PId=3004&NavId=170

 

The crossover at the 4th order without any compensation network places externally and with weight on top of the loudspeakers. I never use any banana plugs to connect the loudspeaker cable for it, just jam the cable right into the whole of connectors.

  Weight on loudspeakers                                                                                              

 

You can put weight on the speakers heavy enough to reduce vibration of the chassis caused by the vibration of the drivers, or else this vibration will distort the output frequencies of each driver.

 

You may buy some heavy objects like 'Starry Night' (???) granite at those masonries elsewhere or anything made of iron that weighs. My granite weighs more or less 60 pounds on top of the 2 loudspeakers or at least heavy enough. Of course, iron weight is the best for putting on loudspeakers.

 

Cables for Loudspeakers

 

Cables for loudspeakers haven’t to be very thick and long as it may cause eddy current, the thinner the better, though it doesn’t have to be too thin while it might have higher resistance and it doesn’t do any good to your system as well. And the positive end and the negative end must be shielded up individually. But the ones you can get in the market are mostly in a bundle with no shielding at all.

  Room Acoustics

 

The sound wave is a kind of energy which travels about 343 metres per second, thus creates problem to the sound quality of the loudspeakers as they continually create sound wave. Room acoustic panels for wave absorbent shall be duly applied to walls and corners. Normally, room for separation in between two loudspeakers is from 6 to 8 feet depending on the size of your drivers. And you can place both sides of your speakers ideally at least 2 to 3 feet away from the walls and corners.

 

If the room isn't big enough, apply more panels as can be as wave absorbent. Doing so will improve the reflection of sound waves as a result which you can get to know what your system is. You can also get foam and corrugated carton board to make panels at real low cost on your own. But some branded ones are just too expensive.

  Active Loudspeakers

 

An active loudspeaker means a loudspeaker with an amplifier inside the chassis, an amplifier inside is mostly for the low frequency, but this amplifier may distort the performance of the drivers and the crossovers of the loudspeaker due to electromagnetic flux and vibration take place. This kind of loudspeakers never sounds as good as a regular, passive loudspeaker which doesn't have an amplifier inside.

  Individual Chamber for each driver   For every loudspeaker I’ll make in the future shall be with individual chamber for each driver and walled by iron sheet. Thus it won’t get interfered one another.   Passive crossovers without Compensation Network   The quality of Eton drivers is good enough and that’s why I don’t need any compensation network. Compensation networks to some extent don’t do any good to the loudspeakers when they sound and consume unnecessary power output which also doesn’t do good to sound quality.   Most people or manufacturers would apply a compensation network to adjust the tone of the sound while the drivers are reproducing annoying sounds. If the drivers are of real good quality, compensation network isn’t necessary.   I don’t recommend any electronic crossover, as most electronic crossovers in the market are solid states which won’t sound real good at all unless you would attach a tube buffer to it.   9) Burning CDs & DVDs Section:   Black burners  

Burning CDs with a CD or DVD writer with a black magazine will improve a lot at a real slow speed such as 4 or 8-x as it has less laser refraction and reflection problems. Furthermore we must find way to reduce vibration caused by the revolving mechanism.

  Black CD-ROMs

 

Burning your CDs with black CD-ROMs, it gets improved in sound quality as well because it has less problem of reflection and refraction of laser beam. Of course, the quality of the PC system you're using to burn up CD-ROMs is also very crucial.

  Enhancing the PC for burning Audio DVDs & CDs

 

Most PCs tend to have bugs; it’s not easy to get them work in a perfect condition. All I do is to treat my PC and the monitor as good as my hi-fi system as I shielded it up as much as can be. The main reason why I treat my PC this way is just for burning CDs since I’ve found most original CDs don’t sound real good.

 

I have backed up all software with the black CD-ROMs and used disc copy function of Nero Burning Rom with jitter correction, including OS, burning software, and then I would use all the backup copies of black CD-ROMs to install my PC. By doing so, the whole system would have fewer bugs than the PC installed with the original software.

 

You can also download a software called 'Gavotte RAM Disk', then you can make a partition out of the physical ram like at least 1 Gigabyte as a physical hard disk, then applied the virtual memory to it, the whole system will work better than as usual. Or you just can set the virtual memory to 10 Gigabytes if the free space of your hard disc allowed. I would set the virtual memory to another partition in case it’s allowed. And you can also create some partitions with your hard disk just for burning CD-ROMs or DVD-ROMs.

 

I have also disabled some services and functions of the Windows XP OS which are automatically working in the background. By the time I am burning any CDs or DVDs, I just want the OS work as little as possible besides the burning software.

 

It's better to get an external hard disk drive and an external black DVD/CD-ROM writer with a black magazine with external power supply away from your PC, thus minimize the impact of electromagnetic interference. And I would use black CD-ROMs for burning CDs as well.

  That’s why most CDs and DVDs I have burnt after enhancing the PC which should have been improved and they sound much better than any original CDs. And then I have thrown away all the originals, ha-ha...   Original DVDs and CDs don't sound real good.

 

I have never listened to music with original CDs or DVDs for quite a long time as they don’t sound real good at all. Since my friends taught me how to burn CDs 7 or 8 years ago, I started studying why and how to burn a real good DVD and CD. It’s most crucial factor that CD or DVD is the primary audio source that affects the final output thru the loudspeakers.

 

Firstly, electromagnetic flux also gives serious impacts to recordings as it gives coloration during recording when the recording system, editing system are turned on. One should shield up every cable connected to the system, or else, it’s hard to record a true audio image to live.

 

Secondly, CD is a kind of software with digitally simulated analogue signals which has been die-cast or bumped, then metallic plated. Original CDs made this way tend to have errors as the die may wear out during bumping. That’s the main reason why the first copy will sound best while the last copy; maybe the 10,000th one can’t sound as good as the 1st one.

 

It means that every copy made this way may sound differently as the die may wear out as it bumps again and again. That’s why I would burn it up and the digital signals will be improved in a correct manner through the digital processing of a CPU of computer.

 

That’s why we can’t find original CDs never sound good as real live.

 

Rubbing out the CD/DVD edge

 

You may rub out the CD/DVD edge to improve the sound quality of the CD/DVD. The size of CD gets smaller; it gets more stable during revolving and less friction with the air.

 

Painting up CD/DVD edge in black

 

You can get it improved by using a flat black ‘Zebra’ McKee marker to paint up the CD/DVD edge in black; the sound quality can also improve a little bit, better than doing nothing because it reduces the problems of reading errors influenced by reflection and refraction of the laser beam. Of course, you can also paint it up after rubbing off the CD/DVD edge as the improvement in sound is much better.

      Recordings concerns...

 

Shielding is also important to all recording systems including digital recorder, mixing system and editing system. EMF also gives coloration and distorts the quality of recordings. But unfortunately, most recording engineers neglect this problem. That’s why there’s not much good quality recording you can get on earth.

 

All these methods I put down here in my blog also do real good to recordings. Unfortunately there are not many good recordings you can get here in Hong Kong both for audio CDs or movie DVDs. Most of them are like junk I can say, bad singing, bad recordings, or badly editing or bad mixing, etc, while some movies from the States give real good live recordings.

 

As for some playhouse in China, you can find some good recordings there too, but for those in Hong Kong, they never do as professional as can be or just spoil things up. 

  Painting up the edge of CD-ROMs or DVD-ROMs in black   Before you’re burning CD-ROMs or DVD-ROMs in black with a flat black ‘Zebra’ McKee marker, this also improves the burning quality because it further reduces the problem of laser reflection and refraction.   Warning: Those who wish to burn CD or DVD back-ups must observe and must not violate the law of copyright infringement; otherwise you shall bear all responsibilities or liabilities of legal proceedings at your own risks.   Burning Software   There are 2 burning programs I strongly recommend that, one is Nero Burning Rom and another is Ulead DVD MovieFactory 6. Especially, Ulead DVD MovieFactory 6 is a program that’s real good in burning DVD Audio discs, the copies it burns are much better replaying quality than any CDs. You can download the trial versions for trying and burning before you make any decision to buy.   There’s free burning software which is also a real good one called ‘Ashampoo Burning Studio 6’, you may download it at the path below:   http://www.softpedia.com/get/CD-DVD-Tools/Data-CD-DVD-Burning/Ashampoo-Burning-Studio-Free.shtml   10) Other Improvements Section:                                                                                   Do-It-Yourself   If you’re a DIYER, you’ll have more room to get your system improved and it doesn’t cost much, if not, you can’t find much room for improving the sounds of most branded systems.

 

Cans made of Iron

 

You can get cans out of fruits or juice can, you can get it at any supermarket or store, some cans may fit the size of the tubes you’re using, they can act as a good shielding tool to your tubes and they cost little.

 

Cones that reduce vibration

 

Cones are suggested to place right under loudspeakers and CD or DVD players as they would reduce vibration. Theoretically, 3 cones form perfect plain, but 4 cones will be more appropriate and secure for some heavy objects, and then you can put some weights heavy enough on top to further reduce vibration problem.

Partitions with insulated iron

 

Ironclad partitions are crucial especially with power to signals transmission. Signals are easily be distorted by running power which gives serious impact to both video & audio quality. And partitions are real good to loudspeakers as well; there might be a chamber for each driver.

 

Magnetic rings

 

Magnetic rings can block up electromagnetic flux, you can apply them onto the wires or cables with positive poles only. But the effect of improvement for this isn’t as crucial as shielding.

 

Heat reducing

 

You can get some kind of metallic heat sink to reduce heat of transformers and tubes, thus the whole system works better. The higher temperature of your system, the higher the impedance that also distorts the way your system works.

  What materials for shielding can be applied to?

 

You can get iron sheets or iron mesh pipe, aluminum foils from shops that sell tools or metals. These materials shall be fully wrapped up by 3M vinyl insulating tape or heat-shrinkable insulating pipe, and then applied to any part of the system that carries digital or analogue video and audio signals as isolation to parts that create electromagnetic flux, and then you can find the improvements you can't even dream of... And these materials are real cheap stuff.

 

The best shielding methods

 

Every cable shall be individually shielded up by iron mesh pipe and aluminum foil which reduce the interference by electromagnetic flux and electric field. Unfortunately, we can hardly find this kind of product on earth unless you make it on your own. Ha-ha… everything is on your own.

 

Aluminum and Copper have a high conductivity, but a low relative permeability. They are good for electric field shielding, but not good for magnetic shielding.

  Low frequency magnetic field shielding is very difficult with non-ferromagnetic materials like Copper or Aluminum, but very effective with steel or iron (having a high permeability at low frequency). On the other hand, copper and aluminum are very good for electric field shielding due to their high conductivity.   You can even braid up every inch of the cables with some cheap quality cables, it also minimize the distortion caused by electromagnetic flux. I applied all these 3 methods to the cables and that’s incredible.   Stands made of Iron or Steel

 

Stands for placing your components are best made of iron or steel which shields up electromagnetic field and reduce the distortion to your system caused by EMF. Stands made this way are also heavy enough that vibrations caused by electromagnetic flux and revolving mechanism won’t be coherent with one another.

  Poles isolation

 

Positive pole and negative pole of any cables or circuit shall be shielded up and isolated. Unfortunately, it's hardly found any product of inter-connect or speaker cables being shielded up or isolated independently. There’s no such product you can find in the market unless it's made and designed by yourself.

  eIn my case I would make a single cable for the positive end and another cable for the negative end separately, and I would name this as uni-axial cable, 2 of these instead of a traditional co-axial cable further reduce EMF impact.   Chassis made of iron or steel

 

Chassis made of iron or steel is the best chassis for any electronic systems. Chassis made of aluminum and copper will be only good for electric shielding. Materials must be real thick, firm and heavy to reduce vibrations that caused by EMF.

 

Connecting cables to your loudspeakers

 

It's better to jam the cables right into the hole of banana jacks of the loudspeakers than to use banana plugs instead. The points of contact of banana jacks are real small which doesn’t do any good to transmission of electrons and sound quality at all.

  Perfect Triangle   It’s best to get a perfect triangle to place your loudspeakers with your seat to enjoy and get the best focus image with your listening environment.

 

Room Acoustic Panels made by corrugated carton board

 

The sound wave travels about 343 metres per second; it means that if the room is about 10 metres long, it travels about 34 times to and fro from one wall to another in a second which also creates sound reflection & refraction and thus distorts the sound waves

About the Author

Below are a few more great 80 Music Cd Collection deals on Amazon:

Tik Tok turns back the clock in Danbury
You have to like a band whose members started as street performers in Berlin and that's named after an anachronistic robot from L. Frank Baum 's "Land of Oz" books.